"I have recommended them to other
project managers in the ship yard and will continue to do so. I look
forward to working with VIACS again in the near future."
Jason T. Goetz Quality
Assurance Inspector Vigor Industrial Shipyard &
Marine
Rigorous safety training and empowerment of VIACS
staff ensures continued productivity and hazard reduction at
facilities and on vessels. Please contact
VIACS to perform an evaluation of your particular needs. VIACS
will investigate your facility/vessel and review your requirements
to create a methodology and procedure
suited to the particular application or areas to be serviced. Below
is a list of the most common services
VIACS performs for the shipyard and marine industry. You can click
on Our Services at the top of the page
to view all of the services we offer.
Boiler Fire Tube Cleaning Fire tube cleaning
is important to maintain high energy efficiency. Soot, rust and
other buildup can severly degrade your boiler's efficiency and
decrease its usable life not to mention, cause safety hazards. VIACS
professionals will ensure your firetube boiler operates at peak
efficiency for its maximum lifespan.
Chiller Tube Brushing Chillers are often the
single largest consumers of energy. The undoing of any chiller is
the build-up of scale, biological growth, and corrosion inside
chiller tubes. When this occurs, efficiencies are eroded and the
chillers life cycle can be significantly reduced. Preventive
maintenance, including cleaning the chiller tubes, will yield
optimum efficiency of the chillers.
Coil Cleaning A coil fouled with dirt and
grime cannot supply proper heat transfer, resulting in greater
energy consumption. Equipment operating with dirty coils uses more
energy than those with clean coils. Additionally, a dirty systems
cooling capacity is greatly reduced. Dirty coils increase operating
pressure and temperature, which breaks down the compressors
lubricant and can result in equipment failure. A failed compressor
means no cooling and costly repair.
Drop Ceiling Cleaning Ceilings are a trap for
carbon monoxide, oils, grease, smoke, nicotine and carbon. They
provide a breeding ground for bacteria and mold. These factors along
with other unsanitary pollutants bond to amino and fatty acids to
create the sick building syndrome. VIACS' cleaning system breaks
down and dissolves these substances, returning your ceiling surface
to a like-new condition. In addition to the ceiling tiles being
deodorized and sanitized, they regain their acoustic, fire rating,
and light reflection values. Your working and living environment is
positively enhanced.
Ductwork Cleaning If not properly installed,
maintained, and operated, ductwork may become contaminated with
particles of dust, pollen or other debris. If moisture is present,
the potential for microbiological growth (e.g., mold) is increased
and spores from such growth may be released into the living and/or
working space. Some of these contaminants may cause allergic
reactions or other symptoms in people if they are exposed to
them.
Electrical Apparatus / Motor Cleaning With
our Cryogenic (Dry Ice) Blasting process, VIACS professionals can
thoroughly and gently clean all kinds of electrical and electronic
equipment. Dry Ice Blasting is nonabrasive and the materials used
are nonconductive, making it the ideal choice for cleaning sensitive
equipment like switchboards, circuit breakers, AC and DC motors,
generators, and more.
Encapsulation & Coatings VIACS
specialises in offering environmental coating solutions through
effective applications and technologies. These applications help in
improving the safety of workplace, sustainability of natural
resources, reduction of greenhouse gas emissions and energy
efficiency. VIACS' encapsulation & coating services improve the
comfort levels and extend the structural life of treated
surfaces.
Fan Cleaning One of the most fundamental ways
to reduce fire risk is to eliminate built-up grease, debris, and
other by-products that serve as fuel sources within ventilation and
exhaust systems. With routine cleaning, equipment life is extended
and most importantly, efficiency is increased. VIACS will clean your
fans and exhaust systems to the metal and ensure these systems are
in good working order.
Filter Rack Repairs Damaged metal filter
racking systems can often be repaired, avoiding the cost and
inconvenience of a complete filter rack replacement.
Filter Replacement VIACS professionals can
replace just about any type of filter, including dust collection,
HVAC and equipment filters. Regular filter replacement can help
extend the useful life of your HVAC units and equipment, decrease
energy costs, and reduce the risk of poor health caused by poor
indoor air quality.
Fire Cleanup HVAC systems A fire loss is very
complex because of the unique behavior of smoke, which flows through
plumbing cavities and HVAC systems. Hot embers of a fire will often
damage the interior of the HVAC system and duct work. It is
important to have an experienced restoration team on your side. Fast
treatment will help reduce smoke and soot health hazards. VIACS is
the most comprehensive resource for fire damage services,
assessment, and recovery.
High Bay Cleaning (Beams, Ceilings, Walls, Equipment,
etc.) Buildings that require high bay cleaning usually
have large and/or hard to clean surfaces. VIACS has the tools, the
knowledge, and the trained professionals to ensure that your
building is cleaned to perfection.
HVAC Unit Cleaning One of the biggest
contributors to indoor air quality is the HVAC system (heating,
ventilation and air conditioning). The HVAC system "conditions" the
air inside the building so that it is clean, odor-free and at a
temperature and humidity that the majority of the buildings
occupants find comfortable. HVAC maintenance plays a significant
role in keeping the HVAC system running at peak efficiency.
Interstitial Space Cleaning Interstitial
space is that volume of space above the operating area's ceilings
where the mechanical systems such as HVAC duct, electrical and
piping are run. These mechanical systems often have valves,
instruments and other items which require periodic cleaning. This
space is also often used as a return air plenum warranting periodic
cleaning to alleviate potential detrimental health effects on
people.
Laboratory Equipment Cleaning Regular
cleaning and sanitizing is necessary to keep laboratory equipment
and tools in operable condition and to maintain peak efficiency and
safety.
Lead Abatement As an industry expert in Lead
Abatement, VIACS can deliver a wide array of lead abatement
techniques in a variety of settings. Using our time-proven program,
procedures and personnel, VIACS will safely and economically solve
your lead abatement requirements in an environmentally conscious
manner. Our experienced personnel use the latest proven systems and
technology to assess the extent of your lead problem, devise an
effective solution, and execute a program that brings you into
conformance with federal and local regulations.
Mold Abatement Molds can be found most
anywhere, as long as moisture and oxygen are present. When excessive
moisture accumulates in buildings or on building materials, mold
growth will often occur, particularly if the moisture problem
remains undiscovered or unaddressed. VIACS technicians can remediate
your indoor mold problem by not only stopping the source of moisture
but also removing the mold growth.
Stack Cleaning From generator and equipment
exhaust stacks to ship diesel and paint booth stacks, VIACS
professionals can clean any type of exhaust stack system, keeping
your equipment running efficiently and your air quality at its
best.
Systems Evaluations VIACS has an extensive
inventory of cutting edge instrumentation to aid us in identifying
and solving indoor air quality problems. Our team of technicians has
the analytical skills to measure, document and troubleshoot indoor
air quality problems in existing construction and to help prevent
such problems in new construction.
Tank Cleaning Tank cleaning can be a
complicated process that requires years of expertise and training.
VIACS maintains and cleans tanks for various industries and offers a
full spectrum of tank cleaning services that are best suited to
our customer's needs.
Testing & Reporting Quality assurance is
a vital part of any construction project. By documenting and
reporting mechanical and related items that do not conform to the
project specifications or other contract documents, VIACS serves as
an agent to the owner for quality assurance. VIACS provides
independent testing services with absolutely no affiliation with any
manufacturer, vender, provider, contractor or installer of HVAC
equipment or systems.
[ top ]
|